Equalwall Stator

Pressure Range：6/12/18/24bar

Capacity ：1/2/5/10/17/26/35/52/70/100/130m³/h

Long Pitch：6L

Short Pitch：12/18/24

Material：NBR/EPDM/FKM/HNBR/PTFE

Description

     1. For The Stator Of Iso-Wall Thickness, It Has The Thinner Rubber Layer And The Well-Distributed Rubber Thickness, Which Is Useful For Heat Conduction. Meanwhile, The Spiral Shapes Of Shell Of The Stator Enlarge The Heat Dissipation Area, Which Result In That The Quantity Of Heat Dissipation For The Stator Of Iso-Wall Thickness Is Less Than That Of The Conventional Stator.

     2. Thin Iso-Wall Thickness Stator And The Well-Distributed Rubber Wall Thickness Make The Rubber Of The Stator Expand Evenly Under Thermal Effects, Which Reduce The Magnitude Of Interference Of The Rubbers Of Rotor And Stator.

     3.For The Iso-Wall Thickness Stator, It Has The Higher Single Stage Pressure (The Single Stage Pressure For The Conventional Stator Reaches 0.6 Mpa. The Single Stage Pressure For The Iso-Wall Thickness Stator Reaches 1.0 Mpa).

     4. Have A Good Technical Economy Index. The Screw Pump Having The Iso-Wall Thickness Stator Has The Higher Economic Effects Rather Than The Feasible Process.